Arcadia, Los Angeles County
Structural and seismic work in Arcadia
Aspenwell Construction files Arcadia retrofits, foundation repairs and beam work with the city building office and leaves each stage open for inspection.
Plans for a seismic retrofit, a foundation repair or a beam under a removed bearing wall in Arcadia go to the city's own building office. Arcadia is incorporated, so that office checks the drawings, issues the permit and sends an inspector at each stage. Before filing, we look up the parcel to confirm it lies within city limits, since a mailing address can carry a city name the lot does not belong to.
Drawings that show the load path
Plan review follows force from the roof to the soil, so the drawings have to show each link. For bolting and bracing, the sheets give the anchor spacing along the sill, the plywood on each cripple wall, the edge nailing and the hold-downs at the corners. When a bearing wall comes out, the calculations for the beam, its posts and the footings below them are filed with the set. Reviewer comments arrive in writing, and we answer every one on revised sheets so the record of each change stays with the permit.
Inspections from footing to frame
Arcadia lies in the suburban zone of the San Gabriel Valley, and inspections there move in the same order as the build. A new footing is seen with its steel tied and before any concrete is placed. Bolts and plywood are seen while the crawlspace is still open, and a beam is seen with its connectors bare. Nothing is covered until the inspector signs the card. Sierra Madre, Monrovia, Temple City, San Marino, El Monte and San Gabriel are nearby, and for each of them we look up which office reviews the parcel before filing.
What we build in Arcadia
Structural work comes first on this list, and every service starts with a look at the framing and foundation.
Cities close by
Plan structural work in Arcadia
Send the form and we will arrange a visit, then put the scope in writing.