Moorpark, Ventura County
Whole home remodels and new beams in Moorpark
Aspenwell Construction puts the beam first when a Moorpark whole home remodel removes a bearing wall, with posts, footings and inspection before finishes.
When a whole home remodel in Moorpark takes out a wall that carries the floor or roof above, the new beam becomes the first job. Cabinets, flooring and paint all wait on it. The load that wall used to hold has to be picked up by a beam, passed into posts at each end and set on footings sized for it, and that path is drawn before any demolition starts.
Finding out what the wall carries
We open the ceiling or the attic above the wall to see which way the joists run and whether anything bears on it, such as a ridge post or an upper floor. Down at the foundation, the crawlspace or slab under each future post is checked, because a beam end can concentrate weight onto a spot never built for it. From those findings the engineer works out the beam size, the post size and any new pad footings. Temporary shoring walls hold the framing up on both sides while the old studs come out and the beam goes in.
Inspection, then the rest of the remodel
The permit set for Moorpark goes to the city building department, which reviews the beam calculations and the footing details. An inspector looks at the new footings before concrete is poured and at the beam hangers and straps while the framing is still bare. Where a crawlspace lies under the floor, anchor bolts and cripple wall plywood can be added under that permit while the floor is open. After the structure is signed off, the kitchen, baths and finishes move ahead on a frame with a clear route for its weight to the ground.
What we build in Moorpark
Structural work comes first on this list, and every service starts with a look at the framing and foundation.
Plan structural work in Moorpark
Send the form and we will arrange a visit, then put the scope in writing.