Full Home Remodeling in Rowland Heights
Full home remodeling in Rowland Heights that begins with hold-downs, sill bolts and plywood shear walls, the hardware that ties the frame to the foundation.
Hold-downs, sill bolts and plywood shear panels are the hardware that keeps a Rowland Heights house together in a strong shake. Each hold-down ties the end of a wall to the concrete beneath through a steel bracket, which stops the wall from lifting or rocking off the foundation. We look for them first, since they decide how much of the house can be opened up.
Hardware that does the holding
Plywood shear panels give a wall resistance to sideways push, and hold-downs keep the panel from rotating. Bolts and plates connect the sill to the footing, and straps join floor framing to walls. Where a retrofit is needed, new bolts are drilled and set with epoxy into the concrete, plywood is nailed in a specified pattern, and metal brackets are attached at wall ends. An engineer details each piece, and the inspector checks nailing and anchors before they are covered.
Keeping the hardware when walls change
If a remodel removes a wall that has shear panels, the lost resistance must be replaced somewhere else in the same line of the house. The designer may add a steel frame at a wide opening or move the panel to a neighboring wall. The drawings show these adjustments, so the final structure resists sideways forces at least as well as it did before the layout changed. The inspector verifies nailing on the replacement panels before drywall is hung. The inspector verifies nailing on the replacement panels before drywall is hung.
About our full home remodeling serviceEverything we do in Rowland Heights
Full Home Remodeling in Rowland Heights: questions
A wall braced with plywood needs its resistance replaced elsewhere along the same line of the house before it goes. Load-bearing walls need a beam and posts. Walls doing neither are the easiest to remove. The drawings show which kind each wall is.
Early, if the hardware is missing, since the crew can get at the sill and the short walls. Hardware already present simply joins the framing schedule. Either way, the quote presents that work apart from the rest.
Hold-downs, plywood panels, sill bolts, short walls, joists and rafters all get a close read. The building department reviewing the final plans receives drawings that match the findings, and you receive the written report first.
Full Home Remodeling in other cities
More we build in Rowland Heights
Book an inspection in Rowland Heights
Describe the house and what it needs. We look at the structure first and send the quote in writing.